FT-3400-#00-###-#-#-#-#-#-#-#-#-#-#-#-#

Electromagnetic Insertion Flow Meter
FT-3400 Series
Hot-Tap Insertion Magmeter for Electrically Conductive Liquids
For Chilled Water, Heating Hot Water, Domestic/Municipal Water, Condenser Water and Water/Glycol Applications
Suitable for Pipes 1¼ in. to 72 in. Diameter
±1.0% of Reading Accuracy 2 to 20 ft/s, ±0.02 ft/s Below 2 ft/s
Minimum Conductivity 25 µS/cm
Maximum Pressure Rating 400 psig
No Moving Parts
Three Available Sensor Types - Hot Water, Chilled Water and Domestic Water
316 Stainless Steel and Viton Wetted Materials
1 in. NPT Adapter with 3/8 in. Stem
20 to 28 VDC (400 mA at 24 VDC) or 20 to 28 VAC 60 Hz (10 VA) Power Supply
Isolated Analog Output - One 4-20 mA and One 2-10 V or 1-5 V (with 2 mA / 1 V or 0.5 V Allocated for Alarm Conditions)
High-Resolution Frequency Output
Scalable Pulse Output for Totalization
Master Alarm Signal
Available Bidirectional Configuration with Contact Closure for Flow Direction
Hot-Tap Adapter Design Allows Insertion/Removal Without Interrupting Flow
10 ft. Jacketed Cable Standard
NEMA 4 Weathertight Enclosure
Factory Programmed and Wet Calibrated to NIST-Traceable Standards
Certificate of Calibration Included
1 Year Limited Warranty

FT-3400-100-1A21--PIPESIZE=-HW-W-BS40-180 DEG----2-10V--JOB=