F-4300 Series Clamp-On Ultrasonic Flow & Energy Measurement System
Differential Transit-Time Method - Direct or Reflect Mode
Non-Invasive Clamp-On Transducers - No Pipe Cutting, System Shutdown or Pressure Drop Required
Service: Chilled Water, Hot Water, Condenser Water, Domestic/Municipal Water, Steam Condensate, Boiler Feed and Water/Glycol Solutions
Accuracy ±1.0% of Reading from 1..20 ft/s (±0.01 ft/s Below 1 ft/s)
Overall Flow Range 0.1..20 ft/s
Fluid Temperature Range -40..250°F
Built-In 128 MB Data Logger for Baseline Monitoring
Backlit Alphanumeric Display - 5-Digit Flow Rate with Floating Decimal, 14-Digit Totalizer, Pulse Output Status, Operating Status and Field Configuration
NEMA 4X (IP67) Polycarbonate Wall-Mount Enclosure with Clear Shatterproof Window
Factory-Configured and Programmed to Customer Application Data
NIST Traceable Calibration with Certificate of Calibration
CE Compliant
Output: Isolated 4-20 mA / 0-5 VDC Analog (Internally Powered, 1000O Max Impedance, Field-Selectable) and (2) Programmable Pulse Outputs (Optically Isolated Dry Contacts, 30 VDC at 10 mA Max)
Isolated RS485 Serial Communication - BACnet MS/TP or Modbus RTU (Field-Selectable, BACnet Default)
Power Available in 24 VDC/VAC or 110..240 VAC
25 ft. Transducer Cable
Energy Measurement via Matched Pair of Temperature Sensors (Sold Separately) - BTU/Heat Energy Calculation and Totalization
For Pipes 1/2 in. Through 4 in. Nominal Diameter
Stainless Steel Mounting Bracket Hardware Included
